Horse Clippers

Weighing in at only 225g, this pocket sized trimmer is ideal for show preparation around the face, perfect for removing whiskers and tidying up under the jaw and around the ears.

The Showmate comes in a smart aluminium style box for easy storage. Also included are a set of ceramic blades and four comb attachments, offering a variety of cutting depths, 3mm, 6mm, 9mm & 12mm. Replacement batteries and blades are available to buy in the accessories and blade section.

PLEASE NOTE: This horse trimmer is not to be confused with our heavy duty horse clippers that are recommended for all over body clipping and dense coats. Please visit our Heavy Duty Clipper section, where you will find more appropriate clippers, such as the Masterclip Ranger, Hunter and Rambo clipper, all of which are powerful, heavy duty horse clippers.

Because we specialise in clippers, Masterclip are able to offer exceptional horse clippers at permanently low prices.

All our prices include FREE Delivery (UK Mainland only) and VAT.

If you are unsure of what clipper to buy, then please do ask, as our expert knowledge of horse clippers means that we can advise on which is the best clipper for you and your horse.

Masterclip also specialise in dog clippers, cattle clippers and sheep clippers, along with a range of clipping blades for all our clippers.

Keep your clippers well oiled before, during and after use. If you do not keep them oiled, the motor will struggle and get hot, which will be uncomfortable for your horse and the clippers will eventually stop working.

It is worth taking the time to look after your horse clippers, because if maintained correctly, they will last you for many years. First and foremost, make sure that you store them in a safe and dry place, as any damp may affect the clipper.

Always wipe the blades clean and never wash them in water, as this will cause them to rust.

When you have finished clipping your horse, brush off any loose hairs that are on the machine and if your clipper has an air filter, remove it and clean out any trapped hair. This should be done regularly as the hair builds up quickly and it could cause the motor to overheat and eventually damage the clipper. Remove the clipping blades and brush off any hairs from inside the clipper and oil everything before putting away into store.

If you should experience any problems with your horse clippers, we can often resolve them over the phone. In the unlikely event of there being a fault with your horse clippers during the warranty period, all you need to do is return the horse clippers to us and we will either rectify the problem, if it is covered by the warranty, or inform you of how best to deal with the problem.

Voted "Best Buy" with Your Horse Magazine.

The Masterclip Royale is a mains powered, medium duty two speed horse clipper.

As you can see, this award winning clipper is perfect for the nervous horse, because it is smaller and quieter than most heavy duty horse clippers. For reference purposes, the Royale is being used here on a light to medium density summer coat.

This is a powerful, yet lightweight DC clipper that is strong enough to give your horse an all over body clip and is also ideal for trimming. The Masterclip Royale has the benefit of a two speed rotary motor which has the equivalent to 80 watts of power, with variable cutting speeds of 2300rpm and 2900rpm, so you can slow the pace right down when you get to the sensitive areas.

Top quality extra wide German steel clipping blades are included, which will leave approximately 2.4mm of hair on your horse.

The real benefit of this blade is that the cutting edge is 7cm wide, which is 2cm longer than most standard small A5 sized blades, therefore reducing clipping time.

For a wider selection of blades that fit this horse clipper, you may want to browse through our comprehensive range of clipping blades, as there is a variety of cutting depths to choose from, starting at 0.25mm through to a 16mm finish.

With its ergonomic design, this superb horse clipper is very easy to use as it only weighs 375 grams. The Royale has quick release blades that are compatible with Wahl, Oster and Andis. For ease of storage, these horse clippers come in a tough carry case.

Although the Royale is more than capable of full body clipping, it should not be confused with the Masterclip heavy duty horse clippers that have more powerful motors, such as the Masterclip Ranger, Hunter or Rambo.

If you are buying these clippers to use on your horse, but also fancy using them on your dog, you may want to consider buying a set of Masterclip cutting combs, as these will give you more choice of depths of cut. The cutting combs are very easy to use and simply hook under the bottom of the back blade and stretch up and over the top of the big blade, as they are sprung loaded. These combs come in a pack of four different sizes, 3mm, 6mm, 9mm and 12mm. Here is the link to the pack of four Combs.

It is advisable to use an RCD safety adaptor when clipping, as it will protect you and your horse. If the plug detects any electrical faults, it will interrupt the flow of electricity and will turn your clippers off. The RCD can then be reset.

Because we specialise in clippers, Masterclip are able to offer exceptional value horse clippers at permanently low prices.

All our prices include FREE Delivery (UK Mainland only).

Our expert knowledge of horse clippers means that we can advise on the best clippers to suit your horse. At present, our horse clipping range consists of the Masterclip Showmate corless clippers, Apollo 30w horse clipper, the Royale twin speed horse clipper and our heavy duty models, the Ranger 120w, the Hunter 200w and the 200w Masterclip Rambo.

We also specialise in dog clippers, cattle clippers, sheep clippers and alpaca clippers, along with blades to fit all Masterclip clippers.

Keeping your clippers well oiled before, during and after clipping your horse is essential. If you do not keep them oiled, the motor will struggle and get hot, which could be uncomfortable for your horse and the clippers would probably stop working.

It is well worth making the effort to look after your clippers, because if maintained correctly, they will last for many years. Always make sure that you store them in a safe and dry place, as any damp may affect the performance of your clipper.

Always wipe clean your blades and never wash them in water, as this may cause them to rust.

When you have finished clipping your horse, brush off any loose hairs that are on the machine and if your clipper has an air filter, remove it and clean out any trapped hair. This should be done regularly as the hair builds up quickly and it could cause the motor to overheat and eventually damage the clipper. Remove the clipping blades and brush off any hairs from inside the clipper. It is advisable to oil everything before putting away.

If you should experience any problems with your horse clippers, we can often resolve them over the phone. In the unlikely event of there being a fault with your horse clippers during the warranty period, all you need to do is return the horse clippers to us and we will either rectify the problem, if it is covered by the warranty, or inform you of how best to deal with the problem.

Voted "Best Buy" with Your Horse Magazine.

The Masterclip Royale is a mains powered, medium duty two speed horse clipper.

This set comes with two fine cut German steel blades, one extra wide blade for body clipping, plus a narrow blade that is ideal for the face, ears, throat, feet etc.

This is a powerful, yet lightweight DC clipper that is strong enough to give your horse an all over body clip and is also ideal for trimming. The Masterclip Royale has the benefit of a two speed rotary motor which has the equivalent to 80 watts of power, with variable cutting speeds of 2300rpm and 2900rpm, so you can slow the pace down when you get to the sensitive areas.

With this set you get two blades. The 10w is a good blade to use for all over body clipping on a light to medium density coat and the 10F blade, which is 2cms narrower in width, is ideal for getting into awkward places and around the face. The 10F has a cutting depth of 1.6mm and the 10W cuts to 1.5mm which is also a fine cut finish.

With its ergonomic design, this superb horse clipper is very easy to use as it only weighs 375 grams. The Royale has quick release blades that are compatible with Oster and Andis. For ease of storage, these horse clippers come in a tough carry case.

Although the Royale is more than capable of full body clipping, it should not be confused with the Masterclip heavy duty horse clippers that have more powerful motors, such as the Masterclip Ranger, Hunter or Rambo.

If you are buying these clippers to use on your horse, but also fancy using them on your dog, you may want to consider buying a set of Masterclip cutting combs, as these will give you more choice of depths of cut. The cutting combs are very easy to use and simply hook under the bottom of the back blade and stretch up and over the top of the big blade, as they are sprung loaded. These combs come in a pack of four different sizes, 3mm, 6mm, 9mm and 12mm. Here is the link to the pack of four Combs.

It is advisable to use an RCD safety adaptor when clipping, as it will protect you and your horse. If the plug detects any electrical faults, it will interrupt the flow of electricity and will turn your clippers off. The RCD can then be reset.

Because we specialise in clippers, Masterclip are able to offer exceptional value horse clippers at permanently low prices.

All our prices include FREE Delivery (UK Mainland only).

Our expert knowledge of horse clippers means that we can advise on the best clippers to suit your horse. At present, our horse clipping range consists of the Masterclip Showmate corless clippers, Apollo 30w horse clipper, the Royale twin speed horse clipper and our heavy duty models, the Ranger 120w, the Hunter 200w and the 200w Masterclip Rambo.

We also specialise in dog clippers, cattle clippers, sheep clippers and alpaca clippers, along with blades to fit all Masterclip clippers.

Keeping your clippers well oiled before, during and after clipping your horse is essential. If you do not keep them oiled, the motor will struggle and get hot, which could be uncomfortable for your horse and the clippers would probably stop working.

It is well worth making the effort to look after your clippers, because if maintained correctly, they will last for many years. Always make sure that you store them in a safe and dry place, as any damp may affect the performance of your clipper.

Always wipe clean your blades and never wash them in water, as this may cause them to rust.

When you have finished clipping your horse, brush off any loose hairs that are on the machine and if your clipper has an air filter, remove it and clean out any trapped hair. This should be done regularly as the hair builds up quickly and it could cause the motor to overheat and eventually damage the clipper. Remove the clipping blades and brush off any hairs from inside the clipper. It is advisable to oil everything before putting away.

If you should experience any problems with your horse clippers, we can often resolve them over the phone. In the unlikely event of there being a fault with your horse clippers during the warranty period, all you need to do is return the horse clippers to us and we will either rectify the problem, if it is covered by the warranty, or inform you of how best to deal with the problem.

Voted "Best Buy" with Your Horse Magazine.

The Masterclip Royale is a mains powered, medium duty two speed horse clipper.

This set comes with two German steel wide blades, a fine and medium cut.

This is a powerful, yet lightweight DC clipper that is strong enough to give your horse an all over body clip and is also ideal for trimming. The Masterclip Royale has the benefit of a two speed rotary motor which has the equivalent to 80 watts of power, with variable cutting speeds of 2300rpm and 2900rpm, so you can slow the pace right down when you get to the sensitive areas.

In this set you will receive two German steel blades, so you can choose between a fine or medium cut.

The real benefit of this blade is that the cutting edge is 7cm wide, which is 2cm longer than most standard small A5 sized blades, therefore reducing clipping time.

With its ergonomic design, this superb horse clipper is very easy to use as it only weighs 375 grams. The Royale has quick release blades that are compatible with Wahl, Oster and Andis. For ease of storage, these horse clippers come in a tough carry case.

Although the Royale is more than capable of full body clipping, it should not be confused with the Masterclip heavy duty horse clippers that have more powerful motors, such as the Masterclip Ranger, Hunter or Rambo.

If you are buying these clippers to use on your horse, but also fancy using them on your dog, you may want to consider buying a set of Masterclip cutting combs, as these will give you more choice of depths of cut. The cutting combs are very easy to use and simply hook under the bottom of the back blade and stretch up and over the top of the big blade, as they are sprung loaded. These combs come in a pack of four different sizes, 3mm, 6mm, 9mm and 12mm. Here is the link to the pack of four Combs.

It is advisable to use an RCD safety adaptor when clipping, as it will protect you and your horse. If the plug detects any electrical faults, it will interrupt the flow of electricity and will turn your clippers off. The RCD can then be reset.

Because we specialise in clippers, Masterclip are able to offer exceptional value horse clippers at permanently low prices.

All our prices include FREE Delivery (UK Mainland only).

Our expert knowledge of horse clippers means that we can advise on the best clippers to suit your horse. At present, our horse clipping range consists of the Masterclip Showmate corless clippers, Apollo 30w horse clipper, the Royale twin speed horse clipper and our heavy duty models, the Ranger 120w, the Hunter 200w and the 200w Masterclip Rambo.

We also specialise in dog clippers, cattle clippers, sheep clippers and alpaca clippers, along with blades to fit all Masterclip clippers.

Keeping your clippers well oiled before, during and after clipping your horse is essential. If you do not keep them oiled, the motor will struggle and get hot, which could be uncomfortable for your horse and the clippers would probably stop working.

It is well worth making the effort to look after your clippers, because if maintained correctly, they will last for many years. Always make sure that you store them in a safe and dry place, as any damp may affect the performance of your clipper.

Always wipe clean your blades and never wash them in water, as this may cause them to rust.

When you have finished clipping your horse, brush off any loose hairs that are on the machine and if your clipper has an air filter, remove it and clean out any trapped hair. This should be done regularly as the hair builds up quickly and it could cause the motor to overheat and eventually damage the clipper. Remove the clipping blades and brush off any hairs from inside the clipper. It is advisable to oil everything before putting away.

If you should experience any problems with your horse clippers, we can often resolve them over the phone. In the unlikely event of there being a fault with your horse clippers during the warranty period, all you need to do is return the horse clippers to us and we will either rectify the problem, if it is covered by the warranty, or inform you of how best to deal with the problem.

The Masterclip Ranger is a mains powered, professional 120w horse clipper.

A "Recommended" heavy duty horse clipper by Your Horse Magazine, January 2012.

A powerful air cooled clipper that is suitable for everyday horse clipping, for yards of up to six horses.

The high cutting speed means that the Ranger is ideal for the heaviest of coats and perfect for all cobs. An ideal clipper for all year round trimming, including feathers, whiskers and hogging.

Included with these horse clippers are two sets of high carbon steel, medium cut clipping blades, which will leave approximately 3mm of hair on your horse.

The Masterclip Ranger has a 6 metre long cable and it only weighs 1.2kgs, which makes it an easy clipper to use. The clipper and all its accessories come in a robust carry case for easy storage.

IMPORTANT: It is advisable to use an RCD safety adaptor when clipping, as it will protect you and your horse. If the plug detects any electrical faults, it will interrupt the flow of electricity and will automatically turn your clippers off. The RCD can then be reset and reused. Click here to the accessories page, where you will find the RCD plugs.

Because we specialise in clippers, Masterclip are able to produce exceptional horse clippers at permanently low prices.

All our prices include FREE Delivery (UK Mainland only) and VAT.

Our expert knowledge of horse clippers means that we can advise on the best clippers to suit you and your horse.

We also specialise in dog clippers, cattle clippers, sheep clippers and alpaca clippers, along with blades to fit all Masterclip clippers.

Keeping your clippers well oiled before, during and after clipping your horse is essential. If you do not keep them oiled, the motor will struggle and get hot, which could be uncomfortable for your horse and the clippers will probably stop working.

It is well worth making the effort to look after your horse clippers, because if maintained correctly, they will last you for many years. Make sure that you store them in a safe and dry place, as any damp may affect the performance of the clipper.

Before you clip, run a line of oil along the edge of the blades and also drop some oil into the lubricating points on the clipper head on your clipper, wiping off any excess. This only applies if using a heavy duty clipper. If however, you are using a clipper from our light or medium duty range, you will only need to oil the blades.

Always ensure that the clipper blades are kept clean and only ever oil them when they are free from any loose hair or dirt.

Do not wash your blades in water, as this may cause them to rust.

Listen to your horse clippers because if the noise levels change, then there is a problem. If you are using a heavy duty horse clipper that has recently been oiled, it may be the tension that is incorrect. This can be frustrating but it is easily rectified by either referring to the manufacturer’s instruction booklet or calling us at Masterclip for further advice.

When you have finished clipping your horse, brush off any loose hairs that are on the machine and if your clipper has an air filter, remove it and clean out any trapped hair. This should be done regularly as the built up hair could cause the motor to overheat and eventually damage the clipper. Remove the clipping blades and brush off any hairs from inside the clipper. It is advisable to oil everything before putting away into store.

If you should experience any problems with your horse clippers, we can often resolve them over the phone. In the unlikely event of there being a fault with your clippers during the warranty period, all you need to do is return the horse clippers to us and we will either repair or replace.

The Masterclip Hunter is a mains powered, heavy duty horse clipper.

Voted "Winner" in Your Horse Magazine, January 2012.

Powered by an aircooled fast cutting, 200w motor, the Hunter makes fast and light work of body clipping and is ideal for all year round trimming, including feathers, hogging and whiskers. An ideal clipper to use on fine to medium density coats.

The lightest clipper in our heavy duty horse clipping range, weighing in at only 1kg, makes it an easy clipper to handle. Two sets of blades are included, a 1mm fine cut and a 3mm medium cut. If you need any more blades for your horse clippers, please click here to see our range or telephone 0845 2000 258.

IMPORTANT: It is advisable to use an RCD safety adaptor when clipping, as it will protect you and your horse. If the plug detects any electrical faults, it will interrupt the flow of electricity and will automatically turn your clippers off. The RCD can then be reset and reused. Click here to the accessories page, where you will find the RCD plugs.

These clippers come in a tough carry case which is ideal for storing the clippers, blades and accessories

Because Masterclip specialise in clippers, we are able to produce exceptional horse clippers, at permanently low prices.

All our prices include FREE Delivery (UK Mainland only) and VAT.

Our expert knowledge of horse clippers means that we are here to help advise on which clippers are best to suit your needs.

We also specialise in dog clippers, cattle clippers, sheep clippers and alpaca clippers, along with blades to fit all Masterclip clippers.

Keeping your clippers well oiled before, during and after clipping your horse is essential if you want your clippers to last. If you do not keep them oiled, the motor will struggle and get hot, which could be uncomfortable for your horse and the clippers will eventually stop working.

Before you start to clip, drop a line of oil along the edge of the teeth of the blades and and also put some oil into the oil holes on the clipper head, wiping off any excess. This only applies if using a heavy duty clipper. If however, you are using a clipper from our light or medium duty range, you will only need to oil the blades.

It is well worth making the effort to look after your horse clippers, because if maintained correctly, they will last for many years. Firstly make sure that you store them in a safe and dry place, as any damp may affect the performance of the clipper.

Always ensure that the clipper blades are kept clean and only ever oil them when they are clean and free from any loose hair or dirt.

Never wash your blades in water, as this will cause them to rust.

Always listen to your horse clippers because if the noise levels change, then there is a problem. If you are using a heavy duty horse clipper that has recently been oiled, it may be the tension that is incorrect. This can be frustrating, but it is easily rectified by either referring to the manufacturer’s instruction booklet or calling us at Masterclip for further advice.

When you have finished clipping your horse, brush off any loose hairs that are on the machine and if your clipper has an air filter, remove it and clean out any trapped hair. This should be done regularly as the hair builds up quickly and it could cause the motor to overheat and eventually damage the clipper. Remove the clipping blades and brush off any hairs from inside the clipper. It is advisable to oil everything before putting away into store.

Should you experience any problems with your horse clippers, we can often resolve them by just one phone call. However, in the unlikely event of there being a fault with your horse clippers during the warranty period, all you need to do is send the horse clippers back to us and we will either repair or replace, if it is covered by the warranty.

The Masterclip Rambo is a mains powered, professional heavy duty horse clipper.

This powerful and robust clipper has an air cooled 200w motor, which makes it ideal for the larger yard. The Rambo will effortlessly clip horse after horse and it is also good for all year round trimming on feathers, whiskers and hogging.

The Rambo comes with two sets of high carbon steel medium cut blades, which will leave approximately 3mm of hair on your horse. 1mm fine blades are predominantly used for veterinary purposes and from our experience, the medium blade is not only easier to use, but also gives a better finish, on all types of coats. Ergonomically designed, the Rambo fits nicely in the hand and is a pleasure to use. With its 6 metre long cable, it is easy to get around the horse and the clipper itself only weighs 1.4kgs. These clippers come in a tough carry case which is ideal for storing the clippers and accessories.

If you need any more blades for your horse clippers, please click visit our blade section.

IMPORTANT: It is advisable to use an RCD safety adaptor when clipping, as it will protect you and your horse. If the plug detects any electrical faults, it will interrupt the flow of electricity and will automatically turn your clippers off. The RCD can then be reset and reused. Click here to the accessories page, where you will find the RCD plugs.

Click here to read the tried and tested report by the National Horse & Pony Network or follow us on Facebook.

Because we specialise in clippers, Masterclip are able to produce exceptional horse clippers, at permanently low prices.

All our prices include FREE Delivery (UK Mainland only) and VAT.

Our expert knowledge of horse clippers means that we are here to help advise on which clippers are best to suit your needs.

We also specialise in dog clippers, cattle clippers, sheep clippers and alpaca clippers, along with blades to fit all Masterclip clippers.

Keeping your clippers well oiled before, during and after clipping your horse is essential if you want your clippers to last. If you do not keep them oiled, the motor will struggle and get hot, which could be uncomfortable for your horse and the clippers will probably stop working.

Before you start to clip, drop a line of oil along the edge of the teeth of the blades and and also put some oil into the oil holes on the clipper head, wiping off any excess. This only applies if using a heavy duty clipper. If however, you are using a clipper from our light or medium duty range, you will only need to oil the blades.

It is well worth making the effort to look after your horse clippers, because if maintained correctly, they will last for many years. Firstly make sure that you store them in a safe and dry place, as any damp may affect the performance of the clipper.

Always ensure that the clipper blades are kept clean and only ever oil them when they are clean and free from any loose hair or dirt.

Never wash your blades in water, as this will cause them to rust.

Always listen to your horse clippers because if the noise levels change, then there is a problem. If you are using a heavy duty horse clipper that has recently been oiled, it may be the tension that is incorrect. This can be frustrating, but it is easily rectified by either referring to the manufacturer’s instruction booklet or calling us at Masterclip for further advice.

When you have finished clipping your horse, brush off any loose hairs that are on the machine and if your clipper has an air filter, remove it and clean out any trapped hair. This should be done regularly as the hair builds up quickly and it could cause the motor to overheat and eventually damage the clipper. Remove the clipping blades and brush off any hairs from inside the clipper. It is advisable to oil everything before putting away into store.

Should you experience any problems with your horse clippers, we can often resolve them by just one phone call. However, in the unlikely event of there being a fault with your horse clippers during the warranty period, all you need to do is send the horse clippers back to us and we will either repair or replace, if it is covered by the warranty.

CLIPPER COMBO - SAVE £10.00

The ideal clipper combination, as this set includes the Masterclip Heavy Duty Ranger Horse Clipper and the small, lightweight cordless Showmate. When bought together on this clipper combination deal, you save £10.00.

The Ranger is an easy clipper to use as it features a powerful, air cooled 120 watt motor and only weighs 1.2kgs which makes it ideal for everday clipping for yards of up to six horses. These clippers come with two sets of high carbon steel blades, which give a professional, medium cut finish.

The Ranger is superb at getting the bulk of the hair off, but when you come to the face and all other areas that are sensitive and awkward to reach, simply swap over to the Showmate.

Weighing in at only 225g, the Masterclip Showmate is ideal for finishing off all those hard to reach and sensitive places. This pocked sized quiet trimmer, comes with two rechargeable batteries, which make it an ideal companion to take to shows for last minute show prep.

The Showmate comes in a smart aluminium style box for easy storage and includes a ceramic/titanium blade and four comb attachments, offering a variety of cutting depths, 3mm, 6mm, 9mm & 12mm. Replacement batteries are blades are available to buy from the accessories and blade section.

IMPORTANT: It is advisable to use an RCD safety adaptor when clipping, as it will protect you and your horse. If the plug detects any electrical faults, it will interrupt the flow of electricity and will automatically turn your clippers off. The RCD can then be reset and reused. Click here to the accessories page, where you will find the RCD plugs.

If you need any more blades for your horse clippers, please click here to see our range or telephone 0845 2000 258.

Because we specialise in clippers, Masterclip are able to produce exceptional horse clippers at permanently low prices.

All our prices include FREE Delivery (UK Mainland only) and VAT.

Our expert knowledge of horse clippers means that we can advise on the best clippers to suit you and your horse.

We also specialise in dog clippers, cattle clippers, sheep clippers and alpaca clippers, along with blades to fit all Masterclip clippers.

Keeping your clippers well oiled before, during and after clipping your horse is essential. If you do not keep them oiled, the motor will struggle and get hot, which could be uncomfortable for your horse and the clippers will probably stop working.

It is well worth making the effort to look after your horse clippers, because if maintained correctly, they will last you for many years. Make sure that you store them in a safe and dry place, as any damp may affect the performance of the clipper.

Before you clip, run a line of oil along the edge of the blades and also drop some oil into the lubricating points on the clipper head on your clipper, wiping off any excess. This only applies if using a heavy duty clipper. If however, you are using a clipper from our light or medium duty range, you will only need to oil the blades.

Always ensure that the clipper blades are kept clean and only ever oil them when they are free from any loose hair or dirt.

Do not wash your blades in water, as this may cause them to rust.

Listen to your horse clippers because if the noise levels change, then there is a problem. If you are using a heavy duty horse clipper that has recently been oiled, it may be the tension that is incorrect. This can be frustrating but it is easily rectified by either referring to the manufacturer’s instruction booklet or calling us at Masterclip for further advice.

When you have finished clipping your horse, brush off any loose hairs that are on the machine and if your clipper has an air filter, remove it and clean out any trapped hair. This should be done regularly as the built up hair could cause the motor to overheat and eventually damage the clipper. Remove the clipping blades and brush off any hairs from inside the clipper. It is advisable to oil everything before putting away into store.

If you should experience any problems with your horse clippers, we can often resolve them over the phone. In the unlikely event of there being a fault with your clippers during the warranty period, all you need to do is return the horse clippers to us and we will either repair or replace.

CLIPPER COMBO - SAVE £10.00

This awesome clipper combination includes the Masterclip Hunter Heavy Duty Horse Clipper and the Showmate Cordless clipper. When bought together on this clipper combination deal, you save £10.00.

The Hunter is a mains powered, heavy duty horse clipper, that is powered by an air cooled 200w motor. This clipper has a fast cutting speed, which makes light work of all over body clipping. This is the lightest clipper in our heavy duty horse clipping range, weighing in at only 1kg, making it an easy clipper to handle. Two sets of blades are included with the Hunter horse clipper.

Weighing in at only 225g, the Masterclip Showmate is ideal for all those hard to reach and sensitive places. This pocked sized clipper comes with two rechargeable batteries, which make it an ideal companion to take to shows for last minute show prep.

The Showmate comes in a smart aluminium style box for easy storage, which includes a ceramic/titanium blade and four comb attachments, offering a variety of cutting depths, 3mm, 6mm, 9mm & 12mm. Replacement batteries are blades are available to buy from the accessories and blade section.

IMPORTANT: It is advisable to use an RCD safety adaptor when clipping, as it will protect you and your horse. If the plug detects any electrical faults, it will interrupt the flow of electricity and will automatically turn your clippers off. The RCD can then be reset and reused. Click here to the accessories page, where you will find the RCD plugs.

Because Masterclip specialise in clippers, we are able to produce exceptional horse clippers, at permanently low prices.

All our prices include FREE Delivery (UK Mainland only) and VAT.

Our expert knowledge of horse clippers means that we are here to help advise on which clippers are best to suit your needs.

We also specialise in dog clippers, cattle clippers, sheep clippers and alpaca clippers, along with blades to fit all Masterclip clippers.

Keeping your clippers well oiled before, during and after clipping your horse is essential if you want your clippers to last. If you do not keep them oiled, the motor will struggle and get hot, which could be uncomfortable for your horse and the clippers will eventually stop working.

Before you start to clip, drop a line of oil along the edge of the teeth of the blades and and also put some oil into the oil holes on the clipper head, wiping off any excess. This only applies if using a heavy duty clipper. If however, you are using a clipper from our light or medium duty range, you will only need to oil the blades.

It is well worth making the effort to look after your horse clippers, because if maintained correctly, they will last for many years. Firstly make sure that you store them in a safe and dry place, as any damp may affect the performance of the clipper.

Always ensure that the clipper blades are kept clean and only ever oil them when they are clean and free from any loose hair or dirt.

Never wash your blades in water, as this will cause them to rust.

Always listen to your horse clippers because if the noise levels change, then there is a problem. If you are using a heavy duty horse clipper that has recently been oiled, it may be the tension that is incorrect. This can be frustrating, but it is easily rectified by either referring to the manufacturer’s instruction booklet or calling us at Masterclip for further advice.

When you have finished clipping your horse, brush off any loose hairs that are on the machine and if your clipper has an air filter, remove it and clean out any trapped hair. This should be done regularly as the hair builds up quickly and it could cause the motor to overheat and eventually damage the clipper. Remove the clipping blades and brush off any hairs from inside the clipper. It is advisable to oil everything before putting away into store.

Should you experience any problems with your horse clippers, we can often resolve them by just one phone call. However, in the unlikely event of there being a fault with your horse clippers during the warranty period, all you need to do is send the horse clippers back to us and we will either repair or replace, if it is covered by the warranty.

SAVE £10.00 WHEN THESE CLIPPERS ARE BOUGHT TOGETHER

An awesome clipping combination is offered here with the Masterclip Heavy Duty Rambo Horse Clipper and the small lightweight Showmate, with it's two rechargeable batteries.

The Rambo has a powerful 200w air cooled motor that is superb at quickly removing the bulk of the hair from your horse, whilst the Showmate makes light work of tidying up around the face and getting into those awkward and hard to reach areas. Perfect for the most sensitive of horses, as this clipper is virtually silent.

The Showmate comes with two rechargeable batteries, which make it an ideal companion to take to shows for any last minute show prep. A smart aluminium style box is included for easy storage which contains the clippers, a ceramic/titanium blade and four comb attachments, offering a variety of cutting depths, 3mm, 6mm, 9mm & 12mm, so ideal to use on the dog or anyone else in the family that that requires a little smartening up!! Replacement batteries are available to buy in the accessories section.

The Rambo comes with two sets of high carbon steel medium cut finish blades, along with some clipper oil and a cleaning brush. Ergonomic in design, these low vibration clippers feel good in the hand and are a pleasure to use.

Click here to see the Masterclip Rambo horse clipper in use.

IMPORTANT: It is advisable to use an RCD safety adaptor when clipping, as it will protect you and your horse. If the plug detects any electrical faults, it will interrupt the flow of electricity and will automatically turn your clippers off. The RCD can then be reset and reused. Click here to the accessories page, where you will find the RCD plugs.

The Masterclip Multihead is a mains powered, air cooled heavy duty, interchangeable horse clipper and sheep shearer.

This versatile double headed clipper set comprises of a powerful 200w body, with a horse clipping head and sheep shearing head.

An ideal choice for anyone wanting to clip several horses and trim or dag a small flock.

When the sheep shearing head is fitted, this is a great clipper for dagging and small flock shearing, whilst the horse head makes light work of clipping out several horses.

Two sets of medium cut 3mm horse clipping blades are included in the tough carry case, along a set of dagging blades for the sheep head. A cleaning brush and clipper oil are also provided, to help you maintain your clippers. Dagging and shearing blades are alway available from the blade section.

With its ergonomic design and low vibration, this is an easy clipper to use as it has a long cable and only weighs 1.45kgs.

Because we specialise in clippers, Masterclip are able to offer exceptional animal clippers at very low prices. FREE Delivery (UK Mainland only) and VAT are included in our prices.

Masterclip also specialise in dog clippers, cattle clippers, alpaca clippers and we also stock a full range of clipping blades to fit our range of animal clippers.

It is well worth looking after your animal clippers, because if maintained correctly, they will last you for many years. Firstly make sure that you store them in a safe and dry place, as any damp may affect the performance of the clipper.

Keep your clippers well oiled before, during and after use. If you do not keep them oiled, the motor will struggle and get hot, which could cause your animal some discomfort and the clippers would eventually stop working.

Before you clip, run a line of oil along the edge of the blades and also into the holes on the clipper head, wiping off any excess.

Always ensure that the clipper blades are kept clean and only ever oil them when they are clean and free from any dirt or grease. Never wash your blades in water, as this may cause them to rust.

Listen to your clippers, if the noise levels change, then there is a problem. If you are using a heavy duty clipper that has recently been oiled, it may be the tension that is incorrect. This can be annoying, but it is easily rectified by either referring to the manufacturer’s instruction booklet or calling us at Masterclip for further advice.

When you have finished with the clippers, brush off any dirt and if your clipper has an air filter, remove it and clean out any trapped hair. This should be done regularly as any build up of dirt and grease can cause the motor to overheat and eventually damage the clipper. Remove the clipping blades and brush off any muck from inside the clipper and oil everything before putting away.

In the unlikely event that you should have any problems with your clippers, we can often sort the problem out over the phone. If there is a fault with your clippers during the warranty period, all you need to do is return them to us with your full details and date of purchase and we will either repair or replace the clippers.