Cattle Clippers

The Masterclip Ranger is a mains powered, 120w air cooled, heavy duty cattle clipper.

The Ranger has a very fast cutting speed which makes it an ideal clipper to use for show cattle. It comes with two sets of medium cut clipping blades, which will leave approximately 3mm of hair. If you should need any more blades for your cattle clippers, click here to order or telephone 0845 2000 258.

This robust clipper has a 6 metre cable and it only weighs 1.2kgs, which makes it an easy clipper to use. A cleaning brush and some clipper oil are included to help you maintain your cattle clippers, along with a set of manufacturer’s instructions.

For ease of storage, these clippers and accessories come in a tough carry case.

IMPORTANT: It is advisable to use an RCD safety adaptor when clipping. If the plug detects any electrical faults, it will interrupt the flow of electricity and will automatically turn your clippers off. The RCD can then be reset and reused. Click here to the accessories page, where you will find the RCD plugs.

By specialising in clippers, Masterclip are able to offer exceptional cattle clippers, at trade prices. All our prices include FREE Delivery (UK Mainland only) and VAT.

Masterclip also specialise in dog clippers, horse clippers, sheep clippers and alpaca clippers along with a variety of clipping blades to fit all of our clippers.

If you look after your cattle clippers, they will last for years. Make sure you have somewhere dry to store them, as any any damp may affect the clipper.

Keep your clippers well oiled before, during and after use. If you do not keep them oiled, the clippers will get hot, which can cause discomfort for the animal and the clippers will eventually stop working.

Before you start to clip, drop a line of oil along the edge of the blades and and also put some oil into the oil holes on the clipper head, wiping off any excess. This only applies if using a heavy duty clipper. If you are using a clipper from our light or medium duty range, you will only need to oil the blades.

Only ever oil your clippers when they are clean and free from dirt and grease. Do not wash your blades in water, as this may cause them to rust.

Listen to your clippers, if the noise levels change, then there is a problem that needs addressing. If you are using a heavy duty cattle clipper that has recently been oiled, it may be the tension that is incorrect. This can be frustrating, but it is easily rectified by either referring to the manufacturer’s instruction booklet or calling us at Masterclip for further advice.

When you have finished clipping, brush off any dirt on the machine and if your clipper has an air filter, remove it and clean out any trapped hair. This should be done regularly as the hair builds up quickly and it could cause the motor to overheat and eventually damage the clipper. Remove the clipping blades and brush off any dirt from inside the clipper. It is advisable to oil everything before putting away.

If you get any problems with your cattle clippers, we can often resolve them by just one phone call. In the unlikely event of there being a fault with your cattle clippers during the warranty period, all you need to do is return them to us and we will either repair or replace.

The Masterclip Rambo is a powerful 200w, heavy duty cattle clipper.

This mains powered clipper has an air cooled motor and it comes with two sets of medium cut blades, which make it ideal for show cattle. The ergonomic design of this cattle clipper fits nicely in the hand and is therefore easy to use. These powerful clippers weigh 1.4kgs and have a long 6 metre cable.

For ease of storage, the Rambo comes in a tough carry case, along with some clipper oil, a cleaning brush and a set of manufacturer’s instructions.

IMPORTANT: It is advisable to use an RCD safety adaptor when clipping. If the plug detects any electrical faults, it will interrupt the flow of electricity and will automatically turn your clippers off. The RCD can then be reset and reused. Click here to the accessories page, where you will find the RCD plugs.

Masterclip specialise only in clippers, so we are therefore able to offer exceptional cattle clippers, at low prices. All our prices include FREE Delivery (UK Mainland only) and VAT. If you look after your cattle clippers, they will last for years. Store them in a dry place, as any damp may affect the performance of the clippers.

Keeping your cattle clippers well oiled before, during and after use is essential. If you do not keep your clippers oiled, the motor will struggle, get hot and they will probably stop working.

Before use, run a line of oil between the blades and any lubricating points on the clipper head, wiping off the excess. Always ensure that the blades are wiped clean and never wash your blades with water, as this may cause them to rust. Only ever oil when your clippers are clean and free from any dirt or grease.

Listen to your clippers, if the noise levels change, then there is a problem. If you are using a heavy duty clipper that has recently been oiled, it may be the tension that is incorrect. This can be annoying, but it is easily rectified by either referring to the manufacturer’s instruction booklet or calling us at Masterclip for further advice.

When you have finished clipping, brush off any dirt and hair. Your cattle clippers should be cleaned regularly as the build up of dirt can cause the motor to overheat and eventually damage the clipper. Remove the blades and brush off any hair, muck and grease from inside the clipper. It is recommended to oil everything on your cattle clipper, before putting away to store.

If you should get any problems with your cattle clippers, we can often resolve them over the phone. In the unlikely event of there being a fault with your cattle clippers, during the warranty period, all you need do is return the cattle clippers to us and we will either repair or replace.

The Masterclip Outback is an air cooled 200w, mains powered clipper ideal for dirty cattle. Two sets of blades are included, along with a brush and clipper oil, to help you maintain your clippers. With its ergonomic design, the Outback is an easy clipper to use as it has a long cable and only weighs 1.45kgs.

IMPORTANT: It is advisable to use an RCD safety adaptor when clipping. If the plug detects any electrical faults, it will interrupt the flow of electricity and will automatically turn your clippers off. The RCD can then be reset and reused. Click here to the accessories page, where you will find the RCD plugs.

Masterclip also specialise in dog clippers, horse clippers, cattle clippers, alpaca clippers and we also stock a full range of clipping blades to fit our range of animal clippers.

It is well worth looking after your clippers, because if maintained correctly, they will last you for many years. Firstly make sure that you store them in a safe and dry place, as any damp may affect the performance of the clipper.

Keep your clippers well oiled before, during and after use. If you do not keep them oiled, the motor will struggle and get hot, which could cause your animal some discomfort and the clippers would probably stop working.

Before you clip, run a line of oil along the edge of the blades and also into the holes on the clipper head, wiping off any excess. This only applies if using a heavy duty clipper. If however, you are using a clipper from our light or medium duty range, you will only need to oil the blades.

Always ensure that the clipper blades are kept clean and only ever oil them when they are clean and free from any dirt or grease. Never wash your blades in water, as this may cause them to rust.

Listen to your clippers, if the noise levels change, then there is a problem. If you are using a heavy duty clipper that has recently been oiled, it may be the tension that is incorrect. This can be annoying, but it is easily rectified by either referring to the manufacturer’s instruction booklet or calling us at Masterclip for further advice.

When you have finished with the clippers, brush off any wool and dirt and if your clipper has an air filter, remove it and clean out any trapped hair. This should be done regularly as any build up of dirt and grease can cause the motor to overheat and eventually damage the clipper. Remove the clipping blades and brush off any muck from inside the clipper and oil everything before putting away.

In the unlikely event that you should have any problems with your sheep clippers, we can often sort the problem out over the phone. If there is a fault with your sheep clippers during the warranty period, all you need to do is return them to us with your full details and date of purchase and we will either repair or replace the clippers.

The Masterclip Sampson is a mains powered, heavy duty cattle clipper.

This extremely powerful air cooled 300w clipper has a fast cutting speed of 3000rpm. Two sets of medium blades are included in the tough carry case. Ideal for show cattle.

This extremely powerful mains powered 300w clipper has a fast cutting speed and is therefore suitable for show cattle. Two sets of blades are included, along with a brush and clipper oil, to help you maintain your clippers.

IMPORTANT: It is advisable to use an RCD safety adaptor when clipping. If the plug detects any electrical faults, it will interrupt the flow of electricity and will automatically turn your clippers off. The RCD can then be reset and reused. Click here to the accessories page, where you will find the RCD plugs.

Because we specialise in clippers, Masterclip are able to offer exceptional sheep clippers at very low prices. FREE Delivery (UK Mainland only) and VAT are included in our prices.

Masterclip also specialise in dog clippers, horse clippers, cattle clippers, alpaca clippers and we also stock a full range of clipping blades to fit our range of animal clippers.

It is well worth looking after your sheep clippers, because if maintained correctly, they will last you for many years. Firstly make sure that you store them in a safe and dry place, as any damp may affect the performance of the clipper.

Keep your clippers well oiled before, during and after use. If you do not keep them oiled, the motor will struggle and get hot, which could cause your animal some discomfort and the clippers would eventually stop working.

Before you clip, run a line of oil along the edge of the blades and also into the holes on the clipper head, wiping off any excess. This only applies if using a heavy duty clipper. If however, you are using a clipper from our light or medium duty range, you will only need to oil the blades.

Always ensure that the clipper blades are kept clean and only ever oil them when they are clean and free from any dirt or grease. Never wash your blades in water, as this may cause them to rust.

Listen to your clippers, if the noise levels change, then there is a problem. If you are using a heavy duty clipper that has recently been oiled, it may be the tension that is incorrect. This can be annoying, but it is easily rectified by either referring to the manufacturer’s instruction booklet or calling us at Masterclip for further advice.

When you have finished with the clippers, brush off any wool and dirt and if your clipper has an air filter, remove it and clean out any trapped hair. This should be done regularly as any build up of dirt and grease can cause the motor to overheat and eventually damage the clipper. Remove the clipping blades and brush off any muck from inside the clipper and oil everything before putting away.

In the unlikely event that you should have any problems with your sheep clippers, we can often sort the problem out over the phone. If there is a fault with your sheep clippers during the warranty period, all you need to do is return them to us with your full details and date of purchase and we will either repair or replace the clippers.