100% Secure online payment
Click images to enlarge
This snap on blade is NOT A5 sized. The blade measures 450mm x 450mm.
This is a very short cut surgical blade and will leave approximately 0.20mm of hair.
These blades will cut to a depth of 0.5mm and will produce a very close clip. This blade is ideal for close face work on breeds such as Poodles and Schnauzers.
Used with the Masterclip comb set, this blade offers a variety of depths of cut, which then make it suitable for all over body clipping.
The 30F is a good blade to use on matted hair, however, it must be used with great care as to ensure you do not clip too close and cut your dog.
These blades are compatible with Oster, Wahl and Andis A5 dog clippers.
These blades will cut to a depth of 0.8mm. With a narrow cutting edge of only 2cm wide, this is an ideal clipper blade to use on any breed of dog, around the feet.
These blades will cut to a depth of 1.2mm and will produce a close clip. This blade can be used on a variety of terriers including Bedlingtons, Borders and Yorkshires, along with Spaniels and Old English Sheep Dogs. The cutting depth can be increased if used with a comb set, as this will give you a wider choice of cuts.
The 15F is a good blade to help clip off matted hair, however, it must be used with great care as to ensure you do not clip too close and cut your dog.
This is a popular blade amongst professional dog groomers, as it cuts to a depth of 1.6mm and will produce a smooth and close finish. It is therefore ideal to use for general clipping on most breeds of dogs. This blade works well with the Masterclip comb set, as it offers a wider choice of cuts.
These blades will cut to a depth of 0.25mm and are predominantly used for veterinary purposes. However, if this blade is used by an experienced dog groomer, it can produce a top quality close cut finish, ideal for show Poodles. For the less experienced groomer, the 40F works well when used with the Masterclip cutting combs, as they will give you a variety of extra cutting depths.
Great care must be taken when using the 40F blade. Please ensure that you do not clip too close and cut your dog.
These blades will cut to a depth of 2mm and will produce a good medium clip. Ideal to use on sensitive areas on most breeds including Poodles and Spaniels. For a longer finish, use with blade attachment combs, as this will give you a wider variety of extra cutting depths.
These blades will cut to a depth of 6.0mm so an ideal choice for the long coat. A great blade to use for the bulk of the hair, before switching to the finishing blade, the number 5F. This skip tooth blade is perfect for blending short coats into longer lengths, as it feeds the coat into the blade more effectively, which will allow you to clip under lightly matted areas.
Ideal for lhasa, shih tzu, poodles, airedale, spaniels, terriers.
This full tooth finishing blade will produce a lovely smooth cut and will leave approximately 6.0mm of hair on your dog. It is a superb blade to use after its companion blade, the number 5 skip tooth which is used to remove the bulk of the hair first.
These blades will cut to a depth of 9.0mm so an ideal choice for the longer coat. A great blade to use for the bulk of the hair, before switching to the finishing blade, the number 4F. This skip tooth blade is perfect for blending short coats into longer lengths, as it feeds the coat into the blade more effectively, which will allow you to clip under lightly matted areas.
Ideal for lhasa, shih tzu, poodles, west highland terrier, yorkshire terrier.
This is a full tooth finishing blade that will produce a long cut of approximately 9.0mm. It is a great blade to use after its companion blade, the number 4 skip tooth which is used to remove the bulk of the hair first.
These clipping blades are compatible with Oster, Wahl and Andis A5 dog clippers.
This popular blade is a great companion with the 7 skip tooth, as the skip tooth is good to remove the bulk of the hair, whilst the 7F produces a top quality show finish, which will leave approximately 3.0mm of hair on your dog. For longer cuts, this blade can be used with the Masterclip cutting combs, as they will give you a variety of extra cutting depths..
These blades will cut to a depth of 3mm, so it is an ideal choice for the longer coat. A great blade to use for blending short coats into longer lengths, as it feeds the coat into the blade more effectively, which will allow you to clip under lightly matted areas.
Ideal choice of blade for spaniels, setters, poodles, schnauzer.
This blade is ideal to use with powerful A5 sized clippers, such as the Masterclip Pedigree or Royale.
The cutting edge measures 7cm across, which is 2cm wider than standard A5 sized blades, which cuts down on clipping time, making it an ideal choice for the horse.
This 10w blade produces a medium finish, as it cuts to a depth of approximately 2.4mm. We also sell the fine cut which cuts to a depth of 1.5mm.
These blades are compatible with the Liveryman Harmony and Oster, Wahl and Andis A5 sized dog clippers.
This 10w blade produces a fine cut finish, as it cuts to a depth of approximately 1.5mm. We also sell the medium cut blade which cuts to a depth of 2.4mm.
These blades will cut to a depth of 13mm, so an ideal choice for the longer coat. A great blade to use for the bulk of the hair, before switching to the finishing blade, the number 3F.
Every other tooth on the back blade is missing on the skip tooth blade, which means that it can allow more hair into the clipper. A great blending blade.
Ideal for lhasa, shih tzu, bichon, poodles, kerry blue, pekingese, terrier etc
This is a full tooth clipping blade that will produce a long cut of approximately 13mm. It is a great blade to use after its companion blade, the number 3 skip tooth which is used to remove the bulk of the hair first.
This blade gives the longest full cut available and will leave approximately 16mm of hair on your dog. Ideal for all long coated dogs.
These blades will cut to a depth of 16mm, so an ideal choice for the longer coat. A great blade to use for the bulk of the hair, before switching to the finishing blade, the number 2F.
These blades will cut to a depth of 0.25 mm and will produce a very close clip.
Ideal for short cut work around the face, feet and back end for sanitation purposes
These blades will cut to a depth of 1.6mm and will produce a close clip.
Ideal for short cut work around the face, feet and back end for sanitation purposes.
These blades will cut to a depth of 3mm.
An ideal blade for coat thinning or blending.
These blades will cut to a depth of 6mm.
The teeth on this skip tooth blade are spread further apart than a finishing blade, so a great blade to use on thick coats.
Ideal for blending or thinning.
These blades will cut to a depth of 9mm.
This is an ideal blade to use on horses that require a close cut finish, leaving approximately 1mm of hair.
This is an ideal blade to use on most coats for all types of clips and is also good to use for all year round trimming.
This blade is predominantly used for veterinary purposes as it will only leave 1mm of hair on your horse. Ideal for close cut work including preparation for freeze branding. For the more experienced groom, this is a good blade to use for close cut show preparation.
If you need to leave more hair on your horse, please click here for the medium cut heavy duty horse clipping blade.
These blades are compatible with the Heiniger Handy and Liveryman Calypso Horse Clippers.
These blades produce a medium cut finish and will leave approximately 3mm of hair on your horse. This is an ideal blade to use on most coats for all types of clips and is also good to use for all year round trimming.
The back cutter has 13 teeth and the front comb has 4.
We have many accessories to help you maintain and get more use from your clippers. To See our Accessories
To find out how to clip your dog sucessfully.
To find out how to clip your horse sucessfully.